** FREE SHIPPING ON ALL ORDERS OVER $150.00 **
Shop
Parts
Find My Car

Recirculating BOV

$222.00 $199.80

  • SKU: PSP-TAC-600RD
  • Quantities Low - Order Soon!

Recirculating BOV

$222.00 $199.80

  • SKU: PSP-TAC-600RD
  • Quantities Low - Order Soon!
Color -Red
Select Vehicle
Qty
Add to Cart

Overview

Adjustable relief pressure and flow control makes fine-tuning on the fly simple and quick with the PERRIN Blow Off Valve.

Jump To

High Flow

With large 1.225" inlets and outlets, the PERRIN Blow Off Valve is sized perfectly to relieve any amount of boost pressure without fear of compressor surge. Don’t be fooled by giant oversized blow off valves, these inlet and outlet sizes were chosen to ensure the perfect balance of flow and to maintain boost in your system, without ruining response by dumping too much boost.

Adjustable Relief Pressure

The PERRIN Blow Off Valve cap features adjustable spring tension, which allows for an adjustment when the blow off valve vents. A looser setting will make it act smooth and more like stock. Setting it harder will cause it to vent later and with significantly increased boost levels. This adjustment is important in maintaining air within the boost system without reducing turbo response.

Adjustable Flow Control

The unique design allows you to control the volume of air released when the blow off valve vents. Adjusting the volume of air helps maintain the perfect amount of boost in your system during shifts without causing compressor surge. Venting too little can damage the turbo, venting too much air can make the throttle less responsive. This adjustment is independent of the relief pressure allowing for a totally customizable blow off valve.

Recirculation is Job #1

It is vital that a blow off valve for your WRX/STI recirculates the air back to the intake track to maintain proper air-fuel ratio and driveability between shifts. While this can be set up as a vent-to-atmosphere style blow off valve, we only recommend that on cars running aftermarket Speed Density type tuning (cars without mass airflow sensor).

Low Maintenance

The PERRIN Blow Off Valve requires very little maintenance but when needed, it's very easy and quick to disassemble. Two O-rings are used to seal vital components from the elements making for extended time between service intervals. There are no special tools required and maintenance can be performed without removing the blow off valve from the vehicle.

Direct Fit & Pre-set Adjustment

Included with every PERRIN Blow Off Valve are the necessary components to make this a direct bolt-on for your WRX/STI. Each blow off valve is pre-set out of the box to work perfectly with every application, so no adjustment required.

Construction

The PERRIN Blow Off Valve cap, piston & flange are all CNC machined from 6061 Billet Aluminum. The PERRIN Blow Off Valve body is CNC machined from a single block of aluminum. This makes for a clean look that reduces potential failure points and leaks without additional parts.

Finish

The PERRIN Blow Off Valve body comes in either a black or red anodized finish and the cap comes black anodized. The anodizing keeps the blow off valve looking great during its lifespan. The blow off valve body and cap are pad printed in vibrant lettering to make it easier to read.

Product Details

  • Body Material 6061 Aluminum
  • Body Finish Anodized Red
  • Piston Material 6061 Aluminum
  • Piston Finish Anodize Clear
  • Spring Stainless Steel
  • Flange 6061 Aluminum
  • Cap Material 6061 Aluminum
  • Cap Finish Anodize Black

PSP-TAC-600BK = 2002-2007 WRX, 2004-2020 STI, Black
PSP-TAC-600RD = 2002-2007 WRX, 2004-2020 STI, Red
PSP-TAC-610BK = 2008-2014 WRX & 2005-2009 Legacy GT, Black
PSP-TAC-610RD = 2008-2014 WRX & 2005-2009 Legacy GT, Red

PSP-TAC-600
(1) PERRIN Blow Off Valve
(1) 24" Hose
(1) 12" Hose
(2) M8 Socket Cap Screws
(1) 1/4" Straight hose connector
(1) 1/2" Straight hose connector
(1) 1/2" T-shaped hose connector
(1) M6 Short arm hex key
(1) 1/8 Short arm hex key
(1) 1/16 Short arm hex key
Warranty & Instructions

PSP-TAC-610
(1) PERRIN Blow Off Valve
(1) 12" Hose
(1) 1/4" Straight Hose Connector
(1) M5 Short arm hex key
(1) 1/8 Short arm hex key
(1) 1/16 Short arm hex key
(2) M6 Socket cap screws
(2) Zip ties
Warranty & Instructions

  • 2005 Subaru Legacy GT
  • 2006 Subaru Legacy GT
  • 2007 Subaru Legacy GT
  • 2008 Subaru Legacy GT
  • 2009 Subaru Legacy GT
  • 2002 Subaru WRX
  • 2003 Subaru WRX
  • 2004 Subaru WRX
  • 2005 Subaru WRX
  • 2006 Subaru WRX
  • 2007 Subaru WRX
  • 2008 Subaru WRX
  • 2009 Subaru WRX
  • 2010 Subaru WRX
  • 2011 Subaru WRX
  • 2012 Subaru WRX
  • 2013 Subaru WRX
  • 2014 Subaru WRX
  • 2004 Subaru STI
  • 2005 Subaru STI
  • 2006 Subaru STI
  • 2007 Subaru STI
  • 2008 Subaru STI
  • 2009 Subaru STI
  • 2010 Subaru STI
  • 2011 Subaru STI
  • 2012 Subaru STI
  • 2013 Subaru STI
  • 2014 Subaru STI
  • 2015 Subaru STI
  • 2016 Subaru STI
  • 2017 Subaru STI
  • 2018 Subaru STI
  • 2019 Subaru STI
  • 2020 Subaru STI
5 Year Warranty

PERRIN Performance warrants to the original purchaser that all PERRIN products will be free from defects in material and workmanship within a sixty (60) month period from the date of purchase. *Some exclusions apply

Proposition 65

warning.pngWARNING: Cancer and Reproductive Harm
www.P65Warnings.ca.gov

Off Road Use Only

This product is legal in California only for racing vehicles which may never be used upon a highway. Check your local and federal laws prior to installation.

Estimated DIY Install Time: 30 minutes
Email Our Tech Department: [email protected]
Download Instructions
Gallery

Installation Gallery

Customers also purchased

2.4" Turbo Inlet Hose for WRX/STI

STI, WRX, Legacy GT, Forester XT
$283.50

CARB Approved Cold Air Intake for 2008-2014 WRX & 2008-2015 STI

WRX, STI
$299.70
Added To Cart
Recirculating BOV
$199.80
  • SKU: PSP-TAC-600RD
  • Quantities Low - Order Soon!
View Cart & Checkout Now
Continue Shopping

Add to Wishlist

Thank you!

Thank you for signing up.

© 2020 PERRIN - All Rights Reserved
  • Visa
  • Mastercard
  • PayPal
  • Wire Transfer